When using the gourd seed sheller, in order to ensure safe and efficient operation, as well as maintain the good condition of the equipment, the following precautions should be taken:

1、 Preparation before operation

1. Equipment inspection:

Before using the shell stripping machine, carefully check whether the fasteners of the equipment are tightened, whether the rotating parts are flexible, and whether there is sufficient lubricating oil in the bearings.

Ensure that the shelling machine is placed on a stable and fixed ground, avoiding shaking or shifting during operation.

2. Screen selection:

According to the size of the gourd seeds, choose the appropriate sieve to ensure the peeling effect and the integrity of the seeds.

2、 Operation process

1. Start and idle:

After starting the electric motor, confirm that the direction of rotation of the rotor is consistent with the direction indicated on the implement.

First, idle for a few minutes and observe if there are any abnormal noises or vibrations in the equipment to ensure normal operation before feeding.

2. Uniform feeding:

When feeding, it should be uniform and appropriate to avoid adding too many gourd seeds at once, which may cause equipment overload or blockage.

Ensure that there are no iron filings, stones, or other debris in the gourd seeds to avoid damaging the equipment or affecting the peeling effect.

3. Adjustment and monitoring:

During the shelling process, the shelling effect and the integrity of the seeds should be observed at all times, and equipment parameters such as fan belt tension and screen mesh aperture should be adjusted as needed.

When an increase in the inner shell of gourd seeds is found, the position of the motor can be adjusted in a timely manner to tighten the fan belt, increase the blowing volume, and improve the peeling efficiency.

3、 Safety precautions

1. Personnel safety:

During operation, personnel should stand in a safe position and avoid standing on the side of the belt drive to prevent injury.

Do not perform maintenance or cleaning work while the device is running to avoid accidents.

2. Electrical safety:

Ensure the electrical system of the shell stripping machine is safe and reliable, with good grounding, to avoid safety accidents caused by electrical faults.

4、 Maintenance and upkeep

1. Cleaning and lubrication:

After a period of use, the equipment should be cleaned of dust, dirt, and residual particles inside.

Remove the belt and store it separately, clean all parts of the bearings with diesel, dry them, and apply butter.

2. Storage and Management:

Cover the shell stripping machine and place it in a dry warehouse to avoid exposure to sunlight, rain, and humid environments that may cause corrosion or damage to the equipment.

Regularly inspect the fasteners, bearings, and other components of the equipment to ensure they are in good condition.

In summary, when using a gourd seed sheller, it is necessary to strictly follow the operating procedures and safety precautions to ensure the efficient and stable operation of the equipment. At the same time, strengthen the maintenance and upkeep of equipment to extend its service life.